Stainless Steel 347 Seamless Tubes, Stainless Steel 1.4961 Seamless Tube Exporters, SS
347/347H Welded Tubes Manufacturer, SS 1.4550 Welded Tubes, Stainless Steel S34709
Seamless Tubing, SS TP347H Welded Tubing Distributors, 347 Stainless Steel Tube,
Stainless Steel 347 seamless tubes Supplier, 347 Stainless Steel Tube Manufacturers,
Stainless Steel 347 seamless tubes Exporter, TP347h Seamless Steel Tube, SS 347H Tubes
Supplier, SS UNS S34700 Tubes, Stainless Steel 347H seamless tubes Manufacturer,
Stainless Steel 347/347H Tube, 347 Stainless Steel Coiled Tubing in Mumbai, India.
SS 347H Polished Tubing Dealer, Stainless Steel ASTM A213 TP347H Seamless
Tube, Stainless Steel 347H seamless tubes Exporter, Stainless Steel ASTM A249 TP347
Heat-Exchanger Tubes Traders, Stainless Steel 347 seamless tubes Manufacturer, 347
Stainless Steel Tubing, 347 SS Instrumentation Tubes in India, Stainless Steel 347H ERW
Tube, 347 Austenitic Stainless Steel Tubes, SUS 347/347H Rectangular Tubing Stockists in
Mumbai, 347H Stainless Steel Tube, AISI 347/347H Round Tube, 347H Stainless Steel Tube
Manufacturers, Stainless Steel 347H seamless tubes Supplier, ASTM A554 SS 347/347H
Square Tubing, SS 347H Rectangle Tube, INOX 347 Tube.
Silver tubes are one of the well-known manufacturers, stockiest, exporters,
the stockholder of a qualitative range of Stainless Steel
347 Tubes / Stainless 347H Tubes, which has slightly improved
corrosion resistance in strongly oxidizing environments. Stainless Steel 347 Seamless
Tubes is also advantageous for high-temperature service because of their good mechanical
properties. Stainless Steel 347 Welded Tubes offers higher creep and stress rupture
properties than Stainless Steel 304, which might be considered for exposures where
sensitization and intergranular corrosion are concerns. Stainless Steel 347 EFW Tubes is
a columbium (niobium)/tantalum stabilized austenitic chromium-nickel stainless steel
that provided an 18-8 type alloy with improved intergranular-corrosion resistance.
Stainless Steel 347 ERW Tubes has a slightly improved corrosion
resistance over other stainless steel alloys in strongly oxidizing environments due to
the addition of columbium (niobium) and tantalum.
Stainless Steel 347H Seamless Tubes is the higher carbon (0.04 – 0.10) version of the
alloy. Stainless Steel 347H Welded Tubes was industrialized for improved creep
resistance and advanced potency at temp above 1000 Degree F (537 Degree C).
Stainless Steel 347H EFW Tubes does not perform well in chloride solutions,
even in small concentrations, or in sulphuric acid. Stainless Steel 347H ERW Tubes
should be considered for applications requiring intermittent heating between 800 Degree
F (427 Degree C) and 1650 Degree F (899 Degree C) or for welding under conditions that
prevent a post-weld anneal. The high-temperature oxidation resistance of SS 347
Tubes is similar to that of SS 304.
The Stainless Steel 347/347H Tubes are processed by tested raw
materials; with different heat treatment process tubes attain durability and workability
to harsh environments. Before third parties inspect packaging tubes, these are packed in
the wooden box, crates, cardboard box, and plastic wrapping to prevent them from being
damaged. Silver tubes offer these tubes at reasonable prices; you can place the order
here!
ASTM A249 Stainless Steel TP347/347H Welded Tubes | DIN
1.4550 Tubes | DIN 1.4961 Stainless Steel Tube | SS 347/347H Seamless Tubes
Manufacturers in India | Stainless Steel 347/347H Welded Tube | SS 347/347H ERW Tube
Manufacturer in Mumbai | Stainless Steel S34700 Tubing Stockholders | ASTM A213
TP347/347H Stainless Steel Tube | 347 Stainless Steel Tube Suppliers | SUS 347/347H
Seamless Tube | ASTM A213 TP347/347H Tubes | ASTM A554 SS 347/347H Hollow Tube | SS
UNS S34709 Tube | Stainless Steel 347/347H Superheater Tube Supplier | SS 347/347H
Capillary Tubes | Stainless Steel EN 10217 1.4550 / 1.4961 Tubes | Steel EN 10217-7
347/347H Welded Tubes | 347 Stainless Steel Tubes | Stainless Steel EN 10216-5
347/347H Seamless Tubes | SS EN 10216 1.4550 / 1.4961 Tubes
Stainless Steel 347/347H Tube Specification
| Specifications |
ASTM A213, A249, A269 / ASME SA213, SA249, SA269 |
| Outside Diameter |
6.00 mm OD up to 914.4 mm OD, Sizes up to 24" NB available Ex-stock, OD Size
Steel Tubes available Ex-stock |
| Thickness Range |
0.3mm – 50 mm, SCH 5, SCH10, SCH 40, SCH 80, SCH 80S, SCH 160, SCH XXS, SCH
XS |
| Type |
Seamless / ERW / Welded / Fabricated / CDW |
| Form |
Round Tubes, Square Tubes, Rectangular Tubes, Coiled Tubes, "U" Shape, Pan
Cake Coils, Hydraulic Tubes |
| Length |
Single Random, Double Random & Required Length |
| End |
Plain End, Beveled End, Treaded |
| Outside Finish |
2B, No.4, No.1, No.8 Mirror Finish for Stainless Steel Tubes, Finish as per
customer Requirements |
| Delivery Condition |
Annealed and Pickled, Polished, Bright Annealed, Cold Drawn |
| EN 10216-5 |
EN 10216 347/347H Seamless Steel Tubes, EN 10216-5 1.4550 / 1.4961 Seamless
Steel Tube for pressure purposes |
| EN 10217-7 |
EN 10217 347/347H Welded Steel Tubes, Steel EN 10217-7 1.4550 / 1.4961
Welded Tube for pressure purposes |
Stainless Steel UNS S34700 / S34709 Tubes Equivalent Grades
| STANDARD |
UNS |
WERKSTOFF NR. |
EN |
JIS |
GOST |
| SS 347 |
S34700 |
1.4550 |
X6CrNiNb18-10 |
SUS 347 |
08Ch18N12B |
| SS 347H |
S34709 |
1.4961 |
X6CrNiNb18-12 |
SUS 347H |
- |
347/347H Stainless Steel Tube Chemical Composition
| Grade |
C |
Mn |
Si |
P |
S |
Cr |
Cb |
Ni |
Fe |
| SS 347 |
0.08 max |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 - 20.00 |
10xC – 1.10 |
9.00 - 13.00 |
62.74 min |
| SS 347H |
0.04 – 0.10 |
2.0 max |
1.0 max |
0.045 max |
0.030 max |
17.00 - 19.00 |
8xC – 1.10 |
9.0 -13.0 |
63.72 min |
ASME SA213 SS TP347 / TP347H Tubes Mechanical Properties
| Tensile Strength |
Yield Strength (0.2%Offset)
|
Elongation |
Hardness |
| Rockwell B (HR B) max |
Brinell (HB) max |
| Psi – 75000, MPa – 515 |
Psi – 30000, MPa – 205 |
35 % |
92 |
201 |
Outside Diameter, OD (in mm) & Wall Thickness, WT (in mm) of Stainless
Steel 347 / 347H Tubes
| Product Description |
Outside Diamter, OD (in mm) |
Wall Thickness, WT (in mm)> |
| 347 / 347H Stainless Steel Round Tube |
6mm – 630mm |
0.5mm-30mm |
| 347 / 347H Stainless Steel Square Tube |
12.7mm* 12.7mm to 300mm* 300mm |
0.5mm-30mm |
| 347 / 347H Stainless Steel Rectangular Tube |
10*20mm to 100*200mm |
0.5mm-30mm |
| 347 / 347H Stainless Steel Colour Coated Tube |
6mm to 630mm |
0.5mm-30mm |
| 347 / 347H Stainless Steel Ornamental Tubes |
12.7mm to 76.2mm |
0.5mm-2.0mm |
| 347 / 347H Stainless Steel Electropolished Tubes |
12.7mm to 250mm |
0.5mm-30mm |
| 347 / 347H Stainless Steel Slot Round Tube |
12.7mm to 76.2mm |
0.5mm-2.0mm |
| 347 / 347H Stainless Steel Triangle Tube |
16mm to 85mm |
0.5mm-3.0mm |
| 347 / 347H Stainless Steel Hexagonal Tubes |
13mm to 85mm |
0.5mm-2.0mm |
| 347 / 347H Stainless Steel U Shaped Tube |
20mm to 200mm |
0.5mm-2.0mm |
| 347 / 347H Thin-Wall Stainless Steel Tubes |
22mm*0.7mm to 108mm*2.0mm |
0.5mm-2.0mm |
| 347 / 347H Inner/Outside Polished Stainless Steel Tubes |
12.5mm to 203.2mm |
1.0mm – 5mm |
| 347 / 347H Stainless Steel Seamless Tubes |
6mm to 430mm |
0.8mm – 30mm |
| 347 / 347H Stainless Steel Capillary Tubes |
0.28mm to 10mm |
0.08mm – 1.2mm |
ASTM A213 / A269 Stainless Steel 347 / 347H Tubing Forms & Availability
| Products |
Size |
| ASTM A213 TP347 / 347H SS Square Tube |
ASTM A213 347 / 347H SS High Pressure Tubing |
Sizes 3.35 mm OD To 101.6 mm OD |
| ASTM A213 TP347 / 347H SS Exhaust Tube |
ASTM A269 TP347 / 347H Stainless Steel Flexible Tube |
| ASTM A213 TP347 / 347H Stainless Instrumentation Tube |
ASTM A269 TP347 / 347H SS Rectangular Tube |
| ASTM A213 TP347 / 347H SS Round Tube |
ASTM A269 TP347 / 347H SS Sanitary Tubing |
| ASTM A249 TP347 / 347H Stainless Heat Exchanger Tubes |
ASTM A213 TP347 / 347H Stainless U Shaped Tubing |
| ASTM A269 TP347 / 347H SS Triangle Tubes |
ASTM A213 TP347 / 347H Stainless Threaded Tube |
| ASTM A213 TP347 / 347H Stainless Seamless Tube |
ASTM A269 TP347 / 347H Stainless ERW Tubes |
| ASTM A269 TP347 / 347H SS Welded Tubes |
ASTM A269 TP347 / 347H SS Electric Resistance Welded Tubing |
| ASTM A269 TP347 / 347H SS Coiled Tubing |
ASTM A213 TP347 / 347H SS Structural Steel Furnace Tubing |
Stainless Steel 347 / 347H Tubing Standard Specifications
| Sainless Steel 347 / 347H Tubing
Specifications |
| Spec. No. |
Title |
Scope |
| ASTM A 213 |
Seamless Ferritic Stainless Steel and Austenitic Stainless Steel Boiler,
Superheater, Heat-Exchanger, and Condenser Tubes. |
Pressure tubes, made from 16 grades of austenitic stainless steel and
from 12 grades of ferritic Cr-Mo Alloy Steel. |
| ASTM A 249 |
Welded Austenitic Stainless Steel Boiler, Superheater, Heat-Exchanger,
and Condenser Tubes. |
Pressure tubes, made from austenitic stainless steels, (Types 304, 304H,
304L, 305, 309, 310, 316, 316H, 316L, 317, 321, 321H, 347, 347H, 348,
348H, and XM grades.) |
| ASTM A 268 |
Seamless and Welded Ferritic Stainless Steel Tubing for General Service.
|
15 grades of ferritic stainless steel tubing for general corrosion
resistance and high temperature service. (Types 329, 405, 409, 410, 429,
430, 430Ti, 443, 446, XMs & others). |
| ASTM A 269 |
Seamless and Welded Austenitic Stainless Steel Tubing for General
Service. |
13 grades of austenitic stainless steel tubing for general
corrosion-resisting and high-temperature service. (Types 304, 304L, 316,
316L, 317, 321, 347, 348 and XM grades). |
| ASTM A 270 |
Seamless and Welded Austenitic Stainless Steel Sanitary Tubing. |
Austenitic stainless steel tubing intended for use in the diary and food
industry in sizes up to and including 4 in. in outside diameter. |
| ASTM A 511 |
Seamless Stainless Steel Mechanical Tubing. |
27 grades are covered for mechanical applications. Primarily round
tubing. |
| ASTM A 554 |
Welded Stainless Steel Mechanical Tubing. |
Nineteen grades are covered for mechanical applications. Rounds,
squares, rectangles, and special shapes are included. |
| ASTM A 632 |
Seamless and Welded Austenitic Stainless Steel Tubing for General
Service. Small Diameter. |
9 grades of austenitic stainless steel tubing for general
corrosion-resisting and high-temperature service. |
| ASTM A1016/A1016M |
347 / 347H Stainless Steel Tubes |
18a Standard Specification for General Requirements for Ferritic Alloy
Steel, Austenitic Alloy Steel, and Stainless Steel Tubes |
| ASTM A778/A778M |
Welded Austenitic Stainless Steel 347 / 347H Tubular Products |
Standard Specification for Welded, Unannealed Austenitic Stainless Steel
Tubular Products |
| ASTM A688/A688M |
Seamless and Welded Austenitic Stainless Steel 347 / 347H Feedwater
Heater Tubes |
Standard Specification for Seamless and Welded Austenitic Stainless
Steel Feedwater Heater Tubes |
| ASTM A803/A803M |
Seamless and Welded Ferritic Stainless Steel 347 / 347H Feedwater Heater
Tubes |
Standard Specification for Seamless and Welded Ferritic Stainless Steel
Feedwater Heater Tubes |
| ASTM A1098/A1098M-18 |
Welded Austenitic, Ferritic, Martensitic and Stainless Steel 347, 347H
Boiler, Superheater, Condenser, and Heat Exchanger Tubes |
Standard Specification for Welded Austenitic, Ferritic, Martensitic and
Duplex Stainless Steel Boiler, Superheater, Condenser, and Heat
Exchanger Tubes with Textured Surface(s) |
| ASTM A1012-10 |
Seamless and Welded 347 / 347H Condenser and Heat Exchanger Tubes |
Standard Specification for Seamless and Welded Ferritic, Austenitic and
Duplex Alloy Steel Condenser and Heat Exchanger Tubes With Integral Fins
|
| ASTM F2257 |
347 / 347H Stainless Steel Small Diameter Tubing |
Standard Specification for Wrought Seamless or Welded and Drawn 18
Chromium-14 Nickel-2.5 Molybdenum Stainless Steel Small Diameter Tubing
for Surgical Implants (UNS S31673) |
| AMS 556 |
Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb + Ta) (SAE
30347) Hydraulic. |
Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded
& Drawn |
| AMS 5557 |
Steel Tubing, Corrosion and Heat Resistant 18 Cr; 11 Ni; Ti (SAE
30347)Hydraulic |
Annealed type 347 hydraulic line tubing. Type 1-Seamless Type 2-Welded
& Drawn |
| AMS 5558 |
Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr; 11 Ni, (Cb +
Ta)(SAE 30347) Thin Wall. |
High pressure ducting, wall thickness 2% of O.D. or less. Weld bead
controlled, X-ray. |
| AMS 5559 |
Steel Tubing, Welded, Corrosion and Heat Resistant 18 Cr, 10 Ni, Ti,
(SAE 30347) Thin Wall. |
High pressure ducting, wall thickness 2% of O.D. or less. Weld bead
controlled, X-ray. |
| AMS 5560 |
Steel Tubing, Seamless Corrosion Resistant 19 Cr; 9 Ni (SAE 30347). |
Annealed type 347 aircraft hydraulic fine tubing. (Not subject to high
pressure). Structural. |
| AMS 5561 |
Steel Tubing, Welded and Drawn Corrosion Resistant 21 Cr; 6 Ni; 9 Mn
High Pressure Hydraulic. |
For parts and assemblies such as fluid lines subject to high pressure
and requiring corrosion resistance. 1/8 –
1/4 Hard.
|
| AMS 5562 |
Steel Tubing, Seamless Corrosion Resistant 21 Cr; 6 Ni; 9 Mn Annealed.
|
Parts and assemblies requiring both corrosion and heat resistance, and
having higher strength than 18-8 types. |
| AMS 5565 |
Steel Tubing, Welded, Corrosion Resistant 19 Cr; 6 Ni (SAE 30347). |
Annealed type 347 aircraft hydraulic line tubing. (Not subject to high
pressure), Structural. |
| AMS 5566 |
Steel Tubing, Seamless or Welded Corrosion Resistant 19 Cr;
10 N (SAE 30347) High Pressure Hydraulic |
Cold drawn type 347, high pressure, aircraft hydraulic line tubing.
1/8 hard.
|
| Type 1óSeamless |
| Type 2óWelded & Drawn |
| AMS 5567 |
Steel Tubing, Seamless or Welded Corrosion Resistant 19Cr; 10 Ni (SAE
30347) Hydraulic, Solution Treated. |
Fluid lines subject to medium high pressures requiring corrosion
resistance. Annealed.(1) Seamless (2) Welded & Drawn |
| AMS 5570 |
Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti
(SAE 30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when such parts are welded during fabrication. Requiring
oxidation resistance up to approximately 1500?F, but useful at that
temperature only when stresses are low. |
| AMS 5571 |
Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Cb +
Ta) (SAE 30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when such parts are welded during fabrication. Requiring
oxidation resistance up to approximately 1500?F, but useful at that
temperature only when stresses are low. |
| AMS 5572 |
Steel Tubing, Seamless Corrosion and Heat Resistant 25 Cr; 20 Ni (SAE
30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when welded during fabrication, Requiring oxidation
resistance up to approximately 2000?F, but useful at that temperature
only when stresses are low. |
| AMS 5573 |
Seamless Type 347 Annealed Structural |
Parts & assemblies requirinq,,both corrosion and heat resistance up
to 1600?F. |
| AMS 5574 |
Seamless Type 347H Annealed Structural |
Parts & assemblies requiring both corrosion and heat resistance up
to 2000?F, especially welded assemblies. |
| AMS 5575 |
Steel Tubing, Seamless Corrosion and Heat Resistant 18 Cr; 11 Ni; (Gb +
Ta) (SAE 30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when such parts are welded during fabrication. Requiring
oxidation resistance up to approximately 1500?F, but useful at that
temperature only when stresses are low. |
| AMS 5576 |
Steel Tubing. Welded, Corrosion and Heat Resistant 18 Cr; 10 Ni; Ti (SAE
30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when such parts are welded during fabrication. Requiring
oxidation resistance up to approximately 1500?F, but useful at that
temperature only when stresses are low. |
| AMS 5577 |
Steel Tubing, Welded, Corrosion and Heat Resistant 25 Cr; 20 Ni; (SAE
30347). Annealed Structural. |
Parts and assemblies requiring both corrosion and heat resistance
especially when welded during fabrication. Requiring oxidation
resistance up to approximately 2000?F, but useful at that temperature
only when stresses are low. |
| AMS 5639 |
Seamless Type 347 |
Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion
Embrittlement Capability |
| AMS 5645 |
Seamless Type 347 |
Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion
Embrittlement Capability |
| AMS 5546 |
Seamless Type 347 |
Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion
Embrittlement Capability |
| AMS 5647 |
Seamless Type 347H |
Cold Finished Mechanical Tube Rockwell 90B max Hardness Corrosion
Embrittlement Capability |
| AMS 5648 |
Seamless Type 347 |
Cold Finished Mechanical Tube Rockwell 90B max Hardness |
| MIL-T-5695 |
Tubing, Steel, Corrosion Resistant, (347) Cold Drawn
(1/2 or 1/4 Hard) Smls or
W&D. |
Intended for use in the fabrication of aircraft structural parts
requiring a high degree of resistance to corrosion. |
| MIL-T-6737 |
Tubing, Steel, Corrosion and Heat Resistant (18-8
Stabilized), Welded.Annealed. |
Type 347 and 347H tubing intended for use in the
manufactured exhaust-stacks, manifolds, blast tubes, ring collectors and
similar applications where a weldable corrosion and heat resisting steel
is required or for use at 8000 – 1500?F. |
| (T 347) |
| MIL-T-6845 |
Tubing, Steel, Corrosion Resistant (347) Aerospace Vehicle
Hydraulic System. 1/8 Hard, Seamless, Welded &
Drawn. |
Intended for use in high pressure hydraulic and pneumatic
systems in which corrosion resistant materials are required. The tubing
is not suitable for use in applications assembled by welding or brazing
or exposed to temperatures higher than 800?F, because of impaired
resistance to corrosion, where subsequent anneal not possible. |
| (T347) |
| MIL-T-8504 |
Tubing, Steel, Corrosion Resistant (18-8) Annealed, Aircraft
Hydraulic System. Seamless, Welded. |
Intended for use in high pressure hydraulic and pneumatic
systems in which corrosion resistant materials are required. This tubing
is of lower strength and higher ductility than tubing to Specification
MIL-T-6845. May be used to replace MIL-T-6845 tubing but heavier wall
thicknesses must be used:Same qualifications regarding welding, brazing
& temperature. |
| (T 347) |
| MIL-T-8506 |
Tubing, Steel, Corrosion Resistant, (347) Annealed,
Seamless, Welded. |
Intended for use in the fabrication of aircraft parts
requiring a high degree of resistance to corrosion. Not to be used in
high pressure hydraulic control systems. |
| (T 347) |
| MILT 8606 |
Tubing, Steal, Corrosion Resistant (18-8 Stabilized).
Annealed. Seamless, Welded & Drawn. |
Intended for use in applications which require a high degree
of resistance to corrosion or to temperatures in the range of
800?F-1500?F. or in applications which involve welding. Suitble for use
in tank-automotive equipment for hydraulic and mechanical applications.
|
| (T 347) |
| (T 347H) |
| (T 347) |
| MlL-T-8808 |
Tubing, Steel, Corrosion Resistant (l8-8 Stabilized),
Aircraft Hydraulic Quality. Annealed, Seamless, Welded & Drawn. |
Intended for use in high pressure hydraulic and pneumatic
systems where corrosion and heat resistance are required and in which
welding or brazing may be involved during fabrication. Resists oxidation
at temperatures to 1200?F, but is useful at that temperature only when
stresses are low. |
| (T 347) |
| (T 347H) |
| MIL-T4973 |
Tubing, Steel, Corrosion Resistant, Aerospace Vehicle
Hydraulic System. 1/8Hard. Seamless, Welded &
Drawn. |
Intended for use in high pressure hydraulic and pneumatic
systems where corrosion and heat resistance are required and in which
welding or brazing may be involved during fabrication. Suitable for use
in temperatures to 1200?F, when stresses are low. |
| (T 347) |
| (T 347H) |
| (T 347) |
| (T 347H) |
| MIL-P-1144 |
Pipe, Stainless Steel, (Corrosion Resisting). Seamless or
Welded. Annealed. |
Pipe is intended for high-temperature and hydraulic br other
pressure service under general corrosive conditions. |
| (T 347) (T 347H) |
| (T 347) (T 347H) |
| (T 347) (T 347H) |
Other types of Stainless Steel 347/347H Tubes
ASTM A213 347H Stainless Steel Tube, Stainless Steel 347/347H Rectangle Tubes,
16mm Stainless Steel 347 Tube, SS 347/347H Electric Resistance Welded Tube, ASTM
A249 TP347 Tubes, Seamless Stainless Steel 347 Tube Manufacturer in Mumbai, 347
Stainless Steel U-Tubes, 3/8" Stainless Steel 347H Tube Stockists in India, SS
347 Cold Drawn Tube exporter in India, SS 347H Tube Price List, SS 347/347H
Fabricated Tube, ASTM A269 TP347H Tubing, Stainless Steel 347/347H Tube Gauges,
Grade TP347/TP347H Tubes, Seamless and Welded Austenitic Stainless Steel
347/347H Tubing Distributor, 1/2" Stainless Steel 347H Tubing Supplier in India,
Welded Stainless Steel UNS S34700 / S34709 Tubing
Supplier and Exporter of Stainless Steel 347/347H Tubes in Cities of India
Like
Al Khobar, Geoje-si, New Delhi, Algiers, Ulsan, Cairo, Bhopal, Dubai, Kuwait City, Busan,
Chiyoda, Surat, Kolkata, Ahmedabad, Santiago, Edmonton, Ahvaz, Vung Tau, Baroda, Jaipur,
Istanbul, Al Jubail, Bangkok, Hong Kong, Abu Dhabi, Noida, Nashik, Ranchi, Chandigarh,
Madrid, Gurgaon, Seoul, Milan, Faridabad, Toronto, Thane, Dammam, Petaling Jaya,
Singapore, Muscat, Ankara, Perth, Kanpur, Manama, Visakhapatnam, Rajkot, Mumbai,
Secunderabad, New York, Melbourne, Karachi, Brisbane, Ho Chi Minh City, Montreal,
Hyderabad, Jamshedpur, Aberdeen, Caracas, Bengaluru, Mexico City, Haryana, Navi Mumbai,
Calgary, Nagpur, Gimhae-si, Pimpri-Chinchwad, Jakarta, Jeddah, Dallas, Sharjah, Sydney,
Atyrau, Lagos, Thiruvananthapuram, Rio de Janeiro, Hanoi, Riyadh, Bogota, Granada,
Moscow, Lahore, Courbevoie, Los Angeles, Indore, Howrah, Tehran, La Victoria,
Port-of-Spain, Houston, Coimbatore, London, Kuala Lumpur, Vadodara, Colombo, Doha, Pune,
Chennai, Ernakulam, Ludhiana.
Supplier and Exporter of Stainless Steel 347/347H Tubes in Countries Like
Nigeria, Zimbabwe, Macau, Philippines, Portugal, Australia, Estonia, Kuwait, Greece,
Azerbaijan, South Africa, Algeria, Lebanon, Bhutan, Russia, Argentina, Canada,
Lithuania, Afghanistan, Morocco, Jordan, Bahrain, Netherlands, Saudi Arabia, Hong Kong,
Taiwan, Sweden, Czech Republic, United Kingdom, Ukraine, United Arab Emirates, Germany,
Poland, Costa Rica, Romania, Austria, Malaysia, Chile, Ecuador, Mongolia, India,
Ireland, Slovakia, Colombia, Peru, Nepal, Italy, Singapore, China, Vietnam, Iraq, Yemen,
Gambia, Tibet, Serbia, Switzerland, Iran, Ghana, Denmark, Puerto Rico, Namibia, Finland,
Mexico, Bulgaria, Gabon, Libya, Chile, Bolivia, Hungary, United States, Israel, Trinidad
& Tobago,Tunisia, Venezuela, Qatar, Egypt, France, Poland, Turkey, Norway, Belarus,
Iran, Croatia, Thailand, Kenya, Pakistan, Mexico, Nigeria, Bangladesh, Brazil, Belgium,
Spain, Angola, New Zealand, Indonesia, Kazakhstan, Sri Lanka, South Korea, Japan, Oman.
AN ISO 9001:2015
CERTIFIED COMPANY
