Monel K500 Flanges

Silver Tubes is a reputed merchant and exporter of Monel K-500 Flanges, which can without much of a stretch be welded by gas metal arc, gas-tungsten arc or protected metal arc forms by utilizing fitting filler metals. Monel K-500 Pipe Flanges is a solid solution binary alloy, where with nickel and copper content, they are commonly dissolvable in all proportions. Monel Alloy K-500 Flanges is likewise for the most part more impervious to assault by oxidizing media than higher copper alloys. This flexibility influences Monel Alloy K-500 Pipe Flanges appropriate for service in an assortment of environments. Monel K-500 Slip On Flanges is broadly utilized as a part of marine applications, which is likewise impervious to SCC and pitting in most new and industrial waters. Monel K-500 Blind Flanges displays low corrosion rates in streaming seawater and dormant conditions that have been appeared to initiate crevice and pitting erosion.

ANSI / ASME Monel Alloy UNS N05500 Flanges, Suppliers of Monel K500 Industrial Flanges, ANSI B16.5, B16.47 Monel K500 Pipe Flanges, DIN 2.4375 Monel Flat Flanges, Exporters of B564/ SB564 Monel K500 Flanges, Dealers of JIS Monel K500 Ring Type Joint Flanges, BS Monel K500 Expander Flanges, Monel K500 Orifice Flanges, Monel Alloy K500 Slip On Flanges Stockists and Stockholders in India.

There is no prerequisite for post weld heat conduct in these Monel K-500 Weld Neck Flanges, however, in-depth cleaning post welding is significant for finest erosion protection, and after that there is the peril of embrittlement and containment. In the un-etched condition, a clean specimen of Monel K-500 Socket Weld Flanges will display just arbitrarily scattered non-metallic inclusions. Monel K-500 Orifice Flanges have taking off sturdiness and strength over a broad temp range and remarkable protection from different corrosive atmospheres. Completed manufactures in Monel K-500 Ring Type Joint Flanges can be formed to a wide spread range of mechanical highlights when suitable control of the measure of cold or hot working and the scope of apt thermal conducts is done.

Distributors of ASTM B564 Monel K500 Long Weld Neck Flanges, Monel K500 Spectacle Blind Flanges, ASME SB564 Alloy K500 Square Flanges, Monel K500 High Hub Blinds Flanges, Monel K500 Forging Facing Flanges, UNS N05500 Monel Nipo Flanges Traders, Monel K500 Spades Ring Spacers Flanges, Monel K500 Threaded Flanges, Manufactures of High Quality Monel Alloy Flanges.

    • Monel Alloy K500 Flanges Conform To

      • Forged Monel K500 material conforms to ASME B564
      • Forged Monel K500 flange dimensions conform to ASME B16.5
      • NPT threads conform to ASME B1.20.1
      • Manufacturing facility is ISO 9001:2008
      • Plate Monel K500 flange dimensions conform to ASME B16.5 Class 150
    • Monel K500 Flanges Specifications

      • Material - Monel Alloy
      • Specifications - ASTM B564 / ASME SB 564
      • Standards - ANSI Flanges, ASME Flanges, DIN Flanges, EN Flanges, BS Flanges etc.
      • Dimension - ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc.
      • Class - 150#, 300#, K500#, 600#, 900#, 1500# & 2500#.
      • Pressure - DIN PN6, PN10, PN16, PN25, PN40, PN64, PN100, PN160, etc
      • Size - ½" NB to 60" NB
    • Monel Alloy Flanges Grades

      • STANDARD : Monel K500
      • UNS : N05500
      • WERKSTOFF NR : 2.4375
    • Applications

      • Widely used in cranes
      • Dump trucks
      • In bridges and other structural steel works
      • Transportation equipment
      • Automobile industry
      • Agriculture equipment
      • Roof supports
      • Spiral Cases and penstocks in power plants
      • Machine building
      • Steel constructions
      • Framework structures
      • Containers
      • Pylons and other architectural structures
      • Offshore industries

Monel Alloy K500 Chemical Composition


Grade Ni Fe C Mn Si Cu Al S
Monel K500 63.0 min 05 - 2 0.25 max 1.5 max 0.5 max 27.0 - 33.0 2.3 - 3.15 0.010 max

Monel K500 Mechanical Properties


Density Melting Point Yield Strength (0.2%Offset) Tensile Strength Elongation
8.44 g/cm3 1350 °C (2460 °F) Psi – 1,15,000 , MPa – 790 Psi – 1,60,000 , MPa – 1100 20 %

Other types of Monel K500 Flanges

Flange Stock, Manufacturer, Trader, Dealer, Stockist, Stockholder, Distributors, Supplier and Exporter of Alloy K500 Flanges in India,

Monel UNS N05500 Flanges

150# Monel K500 Flange Dimensions, 300# Monel K500 Flange, 600# Monel K500 Flange, 150 Lb. Monel Alloy K500 Plate Flanges, DIN 2.4375 Monel K500 Tube Plate Flanges suppliers, ASTM B564 Monel K500 Flanges Dealers, UNS N05500 Weld Neck Flanges In series A / B, Monel K500 Groove & Tongue Flanges Exporters, ASME SB564 Monel Alloy K500 Flanges

Monel K500 Flanges

Monel Alloy K500 Forging Flanges

DIN PN10 PN16 Monel K500 flange, Polished Finish Aisi Monel K500 Flange, Monel Alloy K500 low cost PN10 water meter flange, Monel K500 ansi standard fitting flange, EN Monel K500 Flanges, Monel K500 Flat Face Flanges, Monel K500 Cold Forming Flanges, DIN 2.4375 Pipe Flange, Monel Alloy K500 Hot Forming Flanges

Monel Alloy K500 Forging Flanges

B564 / SB564 Monel K500 Industrials Flanges

Suppliers and exporters of UNS N05500 Monel Forged Flanges, Monel Alloy K500 Weldo / Nipo Flanges Stockholders, Monel K500 RtJ Flanges, Monel K500 SWRF Flanges, DIN 2.4375 Monel WNRF Flanges Stockists, Manufacturers of High quality Monel K500 big flange, Alloy K500 Reducing Flanges

Monel K500 Industrials Flanges

DIN, ANSI, BS Monel K500 Flanges

ASTM B564 / ASME SB 564 Monel K500 Flanges, ASME B16.47 Series A Flanges, ASME B16.47 Series B Flanges, Monel K500 Flanges dimensions, Monel Alloy N05500 Flanges Standards, ANSI B16.5 Flanges, Distributors of Monel K500 casting flange, Alloy K500 astm b564 high pressure flange, Monel K500 Collar Flange Traders in Mumbai, India

DIN, ANSI, BS Monel K500 Flanges
  • Monel K500 Flanges

    Monel Alloy K500 Flanges

  • ANSI B16.47 Series A & B Monel K500 Flanges

    ANSI B16.47 Monel K500 Flanges

  • ANSI B16.5 Monel K500 Flanges

    ANSI B16.5 Monel K500 Flanges

  • ASTM B564 Monel K500 Flanges

    ASTM B564 Monel K500 Flanges

Suppliers and exporters in many countries and cities

Muscat, Abu Dhabi, Tehran, Faridabad, Granada, London, Gimhae-si, Nashik, Ahvaz, Colombo, Kolkata, Port-of-Spain, Vadodara, Atyrau, Ho Chi Minh City, Jamshedpur, Bangkok, La Victoria, Brisbane, Jakarta, Mexico City, Nagpur, Busan, Ranchi, Mumbai, Surat, Secunderabad, Chandigarh, Gurgaon, Al Khobar, Geoje-si, Aberdeen, Montreal, Toronto, Baroda, Petaling Jaya, Los Angeles, Istanbul, Kuwait City, Bogota, Calgary, New Delhi, Howrah, Kanpur, Caracas, Noida, Perth, Navi Mumbai, Ahmedabad, Pimpri-Chinchwad, Rio de Janeiro, Seoul, Kuala Lumpur, Edmonton, Ulsan, Santiago, Chiyoda, Haryana, Rajkot, Courbevoie, Madrid, Ankara, Hanoi, Coimbatore, Jeddah, Dallas, Hong Kong, Hyderabad, Riyadh, Bhopal, Pune, Doha, Chennai, Jaipur, Moscow, Sharjah, Lahore, Milan, Manama, Houston, Indore, Thiruvananthapuram, Bengaluru, Lagos, Algiers, Sydney, Karachi, Dammam, New York, Singapore, Melbourne, Visakhapatnam, Dubai, Vung Tau, Al Jubail, Cairo, Thane, Ludhiana, Ernakulam.

India, Indonesia, Bhutan, Israel, Libya, Switzerland, Czech Republic, Portugal, Romania, Austria, Ukraine, Bahrain, Iran, Belarus, Ecuador, Estonia, Bangladesh, Kenya, Namibia, Italy, Germany, Sweden, Kazakhstan, Egypt, Saudi Arabia, Zimbabwe, Greece, Trinidad & Tobago,Tunisia, Denmark, France, Jordan, Gabon, Serbia, Mexico, Brazil, Hungary, Argentina, Norway, Lebanon, United States, Kuwait, Puerto Rico, Bolivia, Finland, New Zealand, Poland, Pakistan, Netherlands, Afghanistan, Oman, Qatar, Taiwan, Spain, Colombia, Venezuela, Japan, Philippines, South Korea, Sri Lanka, Azerbaijan, Vietnam, Costa Rica, United Kingdom, Morocco, Australia, Thailand, Hong Kong, Chile, Gambia, Nigeria, Canada, Malaysia, Belgium, Croatia, Iraq, Yemen, Turkey, Singapore, Chile, Tibet, Russia, South Africa, Algeria, Angola, Mexico, Ghana, Iran, Poland, Bulgaria, Mongolia, Slovakia, Nigeria, Nepal, United Arab Emirates, Peru, Ireland, Macau, Lithuania, China.

Other Types and grades of Monel Alloy Products